|
|
Zone regulator valve G 1"/Rp 1" for shutting off the manifold return flow as well as for taking the TECEfloor SLQ servomotor 230 V or 24 V, Kvs value: 4.6 m³/h, installation dimension 70 mm.
|
|
|
Industrial plastic manifold 1 1/2", basic module for the modular installation of industrial manifolds up to 20 heating circuits, incl. boiler filling/emptying tap and wall mount. Testing pressure 6 bar (< 30 °C, 24 h), operating pressure 3 bar, -20 °C to 60 °C.
|
|
|
Industry heating circuit manifold module, 2-20 heating circuits can be added modularly, O-ring sealing, pre-flow segment with flow rate metre 4-20 l/ min., return segment with integrated valve. For connecting the TECEfloor PE-RT 5S pipes 25 x 2.5 mm using the TECEfloor connection adapter.
|
|
|
Industrial heating circuit manifold, manifold segment, combinable, 1-20 heating circuit can be added modularly, O-ring sealing, flow segment with flow rate metre 4-20 l/min., return segment with integrated valve. Connection for taking the TECEfloor connection adapter type TECEflex.
|
|
|
Plug-in adapter set with TECEfloor system transition type TECElogo-Ax for connecting the TECEfloor PE-RT 5S pipes 25 x 2.5 mm to the TECEfloor industry heating circuit manifolds.
|
|
|
Plug adapter set with TECEfloor system transition type Flex for connection to the TECEfloor industrial heating circuit manifold.
|
|
|
Industrial heating circuit manifold 1 1/2" wall mount set for additional mounting of the manifold module, 400 mm spacing or as of 10 to max. 20 heating circuits.
|
|
|
Industrial heating circuit manifold pressure gauge with installation valve.
|
|
|
Industrial heating circuit manifold ball valve set G 1 1/2", made of brass, installation dimension 88 mm.
|
|
|
Fixed value control with thermostat head and flow sensor, hydraulic comparison with the adjacent heat distribution system via return valve and balance valve possible. Electronically controlled circulating pump ES 15-60/130 (EEI≤0,20) with permanent magnet synchronous motor. Energy efficiency class A, (3 ... 42 W). The patented pump chamber prevents rotor blockages caused by deposits e.g. after long idle times.
Operating modes:
- Constant pressure 300 mbar
- Constant pressure 400 mbar
- Proportional and variably adjustable
Output approx. 10 kW, Primary flow max. 90 °C, primary return max. 55 °C, Pmax = 6 bar, Thermostat valve Kvs value 4.0, Return valve Kvs value 2.7, Primary connection via Rp 3/4", Secondary connection to the manifold R 1", flat sealing, Installation dimension 245 mm.
|