|
|
10 mm thick EPS DEO dh BS200-CS(10)150 folding tacking sheet for universal laying on customer's insulation such as suitable mineral wool, EPS or PUR insulation or in renovations on the existing screed, HBCD-free.
- Made of expanding polystyrene EPS, nominal value of the der thermal conductivity 0.034 W/mK (EN 13163; EN 12667), Rλ = 0,29 m²K/W
- Compression strength at 10 % compression 150 kPA CS(10/Y) 150 (EN 826; EN 13163), EPS Euroclass E (EN 13501-1)
- Coated with a highly tear-resistant, finely woven, fibre-reinforced multi-layer composite woven film made of polyethylene (EN 1264-4), highly adhesive, for very high holding forces for the TECEfloor 10plus tacking pins
- One-sided, self-adhesive 30 mm film overlap, grid printing 10 cm
EPS strength: 10 mm Dimensions: 1.60 x 1.20 m (1.92 m²), delivered folded: 0.80 x 1.20 m
|
|
|
Tacking tool 10plus, suitable only for use with type 10plus tacking pins. These precision-made tools are distinguished by their excellent reliability.
|
|
|
Tacking pins 10plus, for fixing pipes on the TECEfloor folding tacking sheets 10plus. With 4 short holding anchors per pin and a wide supporting surface to achieve very high holding forces and pipe fixing in accordance with standards, also suitable for conventional tacking sheets. Only for use with the TECEfloor tacking tool type 10plus.
|
|
|
Dimpled panel 30-2 for pipe dimensions 14 to 17 mm, spacing VA 6 cm, diagonal 84 mm, EPS DEO sg BS100-SD20-CP2 WLG 040 Rλ = 0.75 m²K/W, moveable load max. 5 kN/m², impact sound improvement 29 dB (to DIN 4109-34: 2016-07 with 60 mm total screed thickness or 45 mm pipe overlap), HBCD-free.
|
|
|
Dimpled panel with 11 mm insulation, laying distance VA 6 cm, diagonally 84 mm, EPS DEO ds BS250-CS(10)200, WLG 035 Rλ = 0.31 m²K/W, continuous compressive stress at 2% compression max. 60 kPa (60 kN/m²), for pipe dimensions 14-17 mm, HBCD-free.
|
|
|
Compensating element NP 30/11 for TECEfloor dimpled panels 30-2 and 11, 900 mm wide, to compensate for door openings or movement joints.
|
|
|
Dimpled sheet without insulation, to be laid on customer's insulation. For pipe dimensions 14-17 mm, spacing VA 6 cm, diagonal 84 mm.
|
|
|
Compensating element for TECEfloor dimpled sheets, 900 mm wide, to compensate for door openings or movement joints. Not suitable for dimpled panels 30-2 and 11.
|
|
|
Universal panel for use in old and new buildings in dry-wall or brick-wall construction systems. Extra-flat EPS element (16 mm) for floor, wall or ceiling with aluminium heat conduction plates glued over whole surface, with predetermined breaking points for adjustment of width and length without tools. For taking TECEfloor underfloor heating pipe PE-RT 5S 12 x 1.5 mm, HBCD-free.
Base plate made of EPS 035 DEO, >240 kPa Thermal conductivity: 0.035 W/mK Thermal resistance: 0.40 m²K/W Heat conducting plates made of aluminium 0.25 mm, with Omega pipe layout Compression strength: >240 kPa at 10 % compression in accordance with EN 826 Building material class B1 Dimensions (L x W x H): 1200 x 750 x 16 mm Spacing: 150 mm
|
|
|
Combination element consisting of three head elements with reversal elbows and compensation element for filling remaining areas, HBCD-free.
Base plate made of EPS 035 DEO, >240 kPa Dimensions (L x W x H): 1200 x 750 x 16 mm
|