Accessories

1 - 7 (7)Number:
tcb_660003.tif

Assembly feet to make it easy to adjust the height of the channel body and fix the position during shell assembly.

Consisting of:

  • 4 x assembly feet incl. sound-proofing cap and mounting material
tcb_660006_neu.tif

Fire protection set for direct vertical installation on the TECEdrainline DN 50 drain for highly fire resistant partitioning of ceiling bushings in solid ceilings for up to 120 minutes. Classification in accordance with DIN EN 13501 for fire resistance class EI 120, European technical approval (ETA-11/0437).

Set consists of:
  • Fire protection sleeve, 2 cross-recessed screws, identification plate, 150 mm DN 50 PP-HT pipe to DIN EN 1451
  • Required core drill hole: ø 130 mm (ø min = 129 mm, ø max = 133 mm)
  • Application area: Solid ceilings from 150-325 mm ceiling thickness
  • No grouting or filling of the gap is necessary.
  • Compatible with all TECEdrainline channels and covers.
tcb_660005.tif
Hair trap made of stainless steel, for fitting into the TECEdrainline channel body.
tcb_660018.tif
Plastic immersion pipe with inner sealing lip membrane as protection against evaporation, barrier against odour and vermin (two-stage trap effect through water seal and sealing lip membrane).
tcb_660014.tif
Self-adhesive butyl sealing tape with matting for sealing TECEdrainline shower channels. For direct adhesion by the customer on the stainless steel flange of the shower channel. With matting for installation in the liquid or strip composite seal.

Roll width: 100 mm, roll length: 3.9 m
tcb_660001.tif
Sound insulation mat for assembly under floating screed in the area of floor-level showers or throughout the bathroom. To reduce plumbing noises and provide impact noise insulation for renovations and new buildings.
Made from recycled high-tensile rubber granules bound with PUR elastomer. Meets enhanced sound insulation requirements for installation noise level according to DIN 4109 supplement 2, issued 1989-11 and the highest sound protection level SSt III according to VDI 4100, issued 2012-10 (sound test verification available on request).

  • Form of delivery: 1.25 m x 1.25 m x 6 mm
  • Fire class: B2 (DIN 4102)
  • Thermal resistance: 0.05 (m²K)/W
  • Compression at 15 t/m²: 0.6 mm
  • Impact noise reduction: ΔLw= 20 dB(A) (with 50 mm screed)
tcb_660002.tif
Sound insulation mat for assembly under floating screed in the area of floor-level showers or throughout the bathroom. To reduce plumbing noises and provide impact noise insulation for renovations and new buildings.
Made from recycled high-tensile rubber granules bound with PUR elastomer. Meets enhanced sound insulation requirements for installation noise level according to DIN 4109 supplement 2, issued 1989-11 and the highest sound protection level SSt III according to VDI 4100, issued 2012-10 (sound test verification available on request).

  • Form of delivery: 8.0 m x 1.25 m x 6 mm (roll, approx. 50 kg)
  • Fire class: B2 (DIN 4102)
  • Thermal resistance: 0.05 (m²K)/W
  • Compression at 15 t/m²: 0.6 mm
  • Impact noise reduction: ΔLw= 20 dB(A) (with 50 mm screed)
1 - 7 (7)