|
|
Toilet module including “easy fit” flush plate installation. For installation in a metal or wooden stud wall, as a pre-wall element or also suitable for single block installation. A connection funnel enables the universal connection of a shower toilet with concealed water and water and electrical connections. The required connection positions should be checked beforehand.
Uni cistern for front actuation:
- Safety tank made of impact-resistant plastic, tested to EN 14055
- Cistern fully pre-assembled and sealed
- Cistern connection with outer thread R 1/2" at the side, compatible with quick adapters
- 10 litre tank volume; 6 litre pre-set standard flush volume, 4.5/7.5/9-litre flush volume can be set at any time; 3-litre partial flush volume for dualflush system; remaining volume can be used for immediate cleaning flush. Setting of a 4/2 litre flush volume by lowering the water level of the water level is optionally possible.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be used as a single or dual-flush cistern
- “easy fit” flush plate installation
- Installation tunnel for service opening, can be shortened without tools
- Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109
Module frame:
- Self-supporting, powder-coated
- Two M 12 retaining bolts and nuts
- Conduit incl. insert funnel for universal positioning of the water connection
- Holding plate for electrical cable and TECEone hot water connection
- Safety bare-wall protection system for easy connection of shower toilets
|
|
|
Toilet module including “easy fit” flush plate installation. For installation in a metal or wooden stud wall, as a pre-wall element or also suitable for single block installation. A connection funnel enables the universal connection of a shower toilet with concealed water and water and electrical connections. The required connection positions should be checked beforehand.
Uni cistern for front or top actuation:
- Safety tank made of impact-resistant plastic, tested to EN 14055
- Cistern fully pre-assembled and sealed
- Cistern connection with outer thread R 1/2" at the side, compatible with quick adapters
- 10 litre tank volume; 6 litre pre-set standard flush volume, 4.5/7.5/9-litre flush volume can be set at any time; 3-litre partial flush volume for dualflush system; remaining volume can be used for immediate cleaning flush. Setting of a 4/2 litre flush volume by lowering the water level of the water level is optionally possible.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be used as a single or dual-flush cistern
- “easy fit” flush plate installation
- Installation tunnel for service opening, can be shortened without tools
- Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109
Module frame:
- Self-supporting, powder-coated
- Two M 12 retaining bolts and nuts
- Conduit incl. insert funnel for universal positioning of the water connection
- Holding plate for electrical cable and TECEone hot water connection
- Safety bare-wall protection system for easy connection of shower toilets
|
|
|
Toilet module including “easy fit” flush plate installation. For installation in a metal or wooden stud wall, as a pre-wall element or also suitable for single block installation. A connection funnel enables the universal connection of a shower toilet with concealed water and water and electrical connections. The required connection positions should be checked beforehand.
Uni cistern for front or top actuation:
- Safety tank made of impact-resistant plastic, tested to EN 14055
- Cistern fully pre-assembled and sealed
- Cistern connection with outer thread R 1/2" at the side, compatible with quick adapters
- 10 litre tank volume; 6 litre pre-set standard flush volume, 4.5/7.5/9-litre flush volume can be set at any time; 3-litre partial flush volume for dualflush system; remaining volume can be used for immediate cleaning flush. Setting of a 4/2 litre flush volume by lowering the water level of the water level is optionally possible.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be used as a single or dual-flush cistern
- “easy fit” flush plate installation
- Installation tunnel for service opening, can be shortened without tools
- Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109
Module frame:
- Self-supporting, powder-coated
- Two M 12 retaining bolts and nuts
- Conduit incl. insert funnel for universal positioning of the water connection
- Holding plate for electrical cable and TECEone hot water connection
- Safety bare-wall protection system for easy connection of shower toilets
|
|
|
Washstand module suitable for installation in a metal or wooden stud wall and as a pre-wall or corner module; also suitable for single block assembly. Sound-insulated galvanised steel crossbeam for attachment of all customary fitting connections.
Completely pre-assembled unit, consisting of:
- Self-supporting installation frame, powder-coated
- Two M 10 retaining bolts, vertically and laterally adjustable distance gauge
- Sound-insulated mounting crossbeams
- Drain bend holder
|
|
|
Shower profile for shower drainage, for installation in tile adhesive above the screed and seal.
Consisting of:
- Shower profile that can be cut to length with internal gradient for improved water drainage and self-cleaning effect
- Shower profile can be shortened to ≥ 500 mm
- Profile cover with "Push Function" for removal by hand, durable to load class K3 - maximum test load 300 kg
- Shower profile and profile cover made of stainless steel, material 1.4301 (304) with coloured PVD coating
- Connection piece for connection with a Optiline drain
- Grip elements for simple installation and solid connection with the tile adhesive
- For floors coverings from 8-25 mm (incl. adhesive bed)
- For flush to the wall installation for wall coverings from 10 mm (incl. adhesive bed)
- For installation at the wall (flush to the wall) or at any specific distance from the wall
|
|
|
Toilet module including “easy fit” flush plate installation. For single block assembly, as a pre-wall module in front of solid walls, and for incorporation into metal or wooden stud walls.
Uni cistern for front or top actuation:
- Safety tank made of impact-resistant plastic, tested to EN 14055
- Cistern fully pre-assembled and sealed.
- Cistern connection with outer thread R 1/2" at the side, compatible with quick adapters
- 10 litre tank volume; 6 litre pre-set standard flush volume, 4.5/7.5/9-litre flush volume can be set at any time; 3-litre partial flush volume for dual-flush system; remaining volume can be used for immediate cleaning flush.
- Insulated against condensation water
- “easy fit” flush plate installation
- Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109
Module frame:
- Self-supporting, powder-coated
- Two M 12 retaining bolts and nuts
- Toilet drain bend DN 90 with joint adapter DN 90/100, made of PP
- Joint adapter also suitable for horizontal installation
- DN 90 toilet connection set including protective plug
- Mounting set for solid walls
- TECEambia dual-flush plate in white
|
|
|
|
|
|
Toilet module suitable for single block assembly including “easy fit” flush plate installation.
Uni cistern for front actuation:
- Safety tank made of impact-resistant plastic, tested to EN 14055 and NF
- Cistern fully pre-assembled and sealed.
- Cistern connection with outer thread 1/2" at the side, compatible with quick adapters
- 10 litre tank volume; 6 litre pre-set standard flush volume, 4.5/7.5/9-litre flush volume can be set at any time; 3-litre partial flush volume for dual-flush system; remaining volume can be used for immediate cleaning flush.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be used as a single or dual-flush cistern
- “easy fit” flush plate installation
- Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109
Module frame:
- Self-supporting, powder-coated
- Two M 12 retaining bolts and nuts
- Toilet drain bend DN 90 with joint adapter DN 90/100, material PVC
- Joint adapter also suitable for horizontal installation
- DN 90 toilet connection set including protective plug
|
|
|
Universal wall bushing made of silicone bronze with long thread and metallic attachment nuts for variable depth adjustment. The maximum wall thickness/depth setting is 35 mm. With plug-in male thread for TECElogo-Push push-fitting with integrated grip function, for potable water and heating installations.
|
|
|
Mixing group with thermostatic valve for connecting with TECEfloor manifolds made of brass and stainless steel. The valve scale from 1-6 simplifies setting the desired temperature for the underfloor heating system within the supply temperature range of 20-43 °C. The device is designed for modern heating systems with a low temperature heat source. The temperature of the water coming from the boiler room should be at least 5 °C higher than the temperature set on the three-way thermostatic valve.
The set contains:
- TECE WILO PARA mixing pump
- Integrated thermostat valve Kvs = 2.5
- 2 x ball shut-off valves Rp 3/4"
- Thermal protection that switches off the pump when the temperature after mixing exceeds 55-60 °C.
- 2 x 0-100 °C pointer thermometers
- 2 x manifold wall brackets
Connection on the primary side Rp 3/4" Manifold mount R1", flat seal Installation width: 195 mm
|