|
|
Dry-wall construction element for fitting to TECEprofil section tubes or for installation in metal or wooden stud walls and as a pre-wall or corner module.
For TECElux glass facing with actuation unit.
TECE flush-mounted cistern:
- Safety tank made of impact-resistant plastic, tested according to EN 14055
- Cistern fully pre-assembled and sealed
- Corner valve and cistern connection pre-assembled
- Cistern connection with external thread R 1/2" on the side, compatible with
quick adapters - 10-litre tank volume; 6-litre pre-set standard flush volume, 9, 7.5, 4.5 litre flush volume can be optimally set at any time; 3-litre partial-flush volume for dual-flush system. Residual volume usable for immediate flush cleaning.
- Insulated against condensation water
- Low-noise hydraulic filling valve, acoustic group 1 according to DIN 4109
- Including insert chute for cleaning tablets. Enables the insertion of cleaning tablets into the cistern, for fresh toilet flushing.
Module frame:
- self-supporting, powder-coated
- Depth-adjustable retainer for upper glass facing with actuation unit and lower glass facing with toilet unit
- Two adjustable foot supports for floor projections of 0-200 mm
- Two M 12 retaining bolts and nuts
- Retainer for toilet ceramics with spacing of 180 mm
- Toilet drain bend DN 90 with transition piece DN 90/100, material PP
- Transition piece also suitable for horizontal installation
- DN 90 toilet connection set, including protective plug
- Large bare-wall protection
- Suitable for wall structures up to 45 mm
|
|
|
Dry-wall construction element for fitting to TECEprofil section tubes or for installation in metal or wooden stud walls and as a pre-wall or corner module.
For TECElux glass facing with actuation unit and glass facing, subsequent 8 cm manual height adjustment option.
TECE flush-mounted cistern:
- Safety tank made of impact-resistant plastic, tested according to EN 14055
- Cistern fully pre-assembled and sealed
- Corner valve and cistern connection pre-assembled
- Cistern connection with 1/2” external thread
- 10-litre tank volume; 6-litre pre-set standard flush volume, 9, 7.5, 4.5 litre flush volume can be optimally set at any time; 3-litre partial-flush volume for dual-flush system. Residual volume usable for immediate flush cleaning.
- Insulated against condensation water
- Low-noise hydraulic filling valve, acoustic group 1 according to DIN 4109
- Including insert chute for cleaning tablets. Enables the insertion of cleaning tablets into the cistern, for fresh toilet flushing.
Module frame:
- self-supporting, powder-coated
- Depth-adjustable retainer for upper glass facing with actuation unit and lower glass attachment facing with toilet unit, height can also be subsequently manually adjusted
- Two adjustable foot supports for floor projections of 0-200 mm
- Two M 12 retaining bolts and nuts
- Retainer for toilet ceramics with spacing of 180 mm
- Flexible toilet drain bend DN 90, connection piece material PE-HD (weldable), including transition piece DN 90/100 made of PP
- DN 90 toilet connection set, including protective plug
- Large bare-wall protection
- Suitable for wall structures up to 45 mm
|
|
|
Dry-wall construction element for fitting to TECEprofil section tubes or for installation in metal or wooden stud walls and as a pre-wall or corner module.
For TECElux glass facing with actuation unit sen-Touch and glass facing, subsequent 8 cm manual height adjustment option, incl. "ceramic-Air" odour extraction.
TECE flush-mounted cistern:
- Safety tank made of impact-resistant plastic, tested according to EN 14055
- Cistern fully pre-assembled and sealed
- Corner valve and cistern connection pre-assembled
- Cistern connection with 1/2" external thread
- 10-litre tank volume; 6-litre pre-set standard flush volume, 9, 7.5, 4.5 litre flush volume can be optimally set at any time; 3-litre partial-flush volume for dual-flush system. Residual volume usable for immediate flush cleaning.
- Insulated against condensation water
- Low-noise hydraulic filling valve, acoustic group 1 according to DIN 4109
- Including insert chute for cleaning tablets. Enables the insertion of cleaning tablets into the cistern, for fresh toilet flushing.
Module frame:
- self-supporting, powder-coated
- Depth-adjustable retainer for upper glass facing with actuation unit and lower glass attachment facing with toilet unit, height can also be subsequently manually adjusted
- Two adjustable foot supports for floor projections of 0-200 mm
- Two M 12 retaining bolts and nuts
- Retainer for toilet ceramics with spacing of 180 mm
- Flexible toilet drain bend DN 90, connection piece material PE-HD (weldable), including transition piece DN 90/100 made of PP
- DN 90 toilet connection set, including protective plug
- Large bare-wall protection
- Suitable for wall structures up to 45 mm
Low-noise "ceramic-Air" odour extraction with long-term filter cartridge.
|