Accessories

tcb_674000.tif
Assembly feet for TECEdrainpoint "standard" and "flat" drain to make it easy to adjust height and fix in position during the bare-wall installation stage. Adjustment range on "standard" pipe 95-194 mm, on "flat" pipe 65-164 mm (lower edge of feet to the upper edge of drain or screed) 

Consisting of:
  • 3 assembly feet incl. sound insulation cap and attachments
tcb_674001.tif
Assembly bracket for "flat" or "standard" drains for assembly at the wall or on the floor. For simple height adjustment and positioning in shell installation.

  • The assembly bracket can be disassembled and reused if used for wall assembly.
  • Adjustable wall spacings of 0 to 97/145 mm (upper edge of wall to front/centre of drain)
  • Height adjustment with floor-mounting 95-185 mm (lower edge of feet to upper edge of drain or upper edge of screed)
tcb_674002.tif
Hair trap made of stainless steel for inserting into the TECEdrainprofile shower profile. With "push function" for easy removal by hand.
One set (consisting of two hair traps) is required for one shower profile.
tcb_660001.tif
Sound insulation mat for assembly under floating screed in the area of floor-level showers or throughout the bathroom. To reduce plumbing noises and provide impact noise insulation for renovations and new buildings.
Made from recycled high-tensile rubber granules bound with PUR elastomer. Meets enhanced sound insulation requirements for installation noise level according to DIN 4109 supplement 2, issued 1989-11 and the highest sound protection level SSt III according to VDI 4100, issued 2012-10 (sound test verification available on request).

  • Form of delivery: 1.25 m x 1.25 m x 6 mm
  • Fire class: B2 (DIN 4102)
  • Thermal resistance: 0.05 (m²K)/W
  • Compression at 15 t/m²: 0.6 mm
  • Impact noise reduction: ΔLw= 20 dB(A) (with 50 mm screed)
tcb_660002.tif
Sound insulation mat for assembly under floating screed in the area of floor-level showers or throughout the bathroom. To reduce plumbing noises and provide impact noise insulation for renovations and new buildings.
Made from recycled high-tensile rubber granules bound with PUR elastomer. Meets enhanced sound insulation requirements for installation noise level according to DIN 4109 supplement 2, issued 1989-11 and the highest sound protection level SSt III according to VDI 4100, issued 2012-10 (sound test verification available on request).

  • Form of delivery: 8.0 m x 1.25 m x 6 mm (roll, approx. 50 kg)
  • Fire class: B2 (DIN 4102)
  • Thermal resistance: 0.05 (m²K)/W
  • Compression at 15 t/m²: 0.6 mm
  • Impact noise reduction: ΔLw= 20 dB(A) (with 50 mm screed)