|
|
Fire protection set for direct installation at the drain. TECEdrainpoint S DN 50 drain vertical for highly fire resistant partitioning of ceiling bushings in solid ceilings for up to 120 minutes. Classification in accordance with EN 13501 for fire resistance class EI 120, European technical approval (ETA-11/0437).
Set consists of fire protection sleeve, 2 cross-recessed screws, identification plate and 150 mm DN 50 PP-HT pipe to EN 1451.
Required core drill hole: Diameter 120 mm (min = 119 mm, max = 123 mm)
Application area: solid ceilings from 150-325 mm ceiling thickness
No grouting or filling of the gap is necessary.
|
|
|
Fire protection sleeve for assembly under the ceiling, using vertical TECEdrainpoint S floor drains DN 70 and DN 100 together with a PP-HT drain pipe in accordance with EN 1451. For highly fire resistant partitioning of the ceiling bushing in solid ceilings for up to 120 minutes. Classification in accordance with EN 13501 for fire protection class EI 120-U/U, European Technical Approval (ETA-18/0537).
Required core drill hole:
- DN 70: diameter 122 mm
- DN 100: diameter 132 mm
Application area: solid ceilings ≥ 200 mm ceiling thickness
No grouting or filling of the gap is necessary.
|
|
|
Seal System sealing sleeve for the execution of an independently tested connection of TECEdrainpoint S drains to the composite seal.
Consisting of:
- PP fleece (top and underside) and inner waterproof PE foil
- Dimensions = 480 x 480 mm
|
|
|
Compression sealing ring set for TECEdrainpoint S drains to create clamped flange connections.
Consisting of:
- Compression ring made of stainless steel, material 1.4301 (304) with pre-drilled hole circle
- Sealing ring made of cellular rubber
- Six stainless steel screws
|
|
|
Sealing sleeve for TECEdrainpoint S drains, for joining bitumen membrane sheets, polymer bitumen membrane sheets or EPDM sealing strips using hot-air welding or full-area welding. The sealing sleeve is fixed on the universal flange with the compression ring set.
- Material: EPDM with glass cloth reinforcement, underside with polymer-modified bitumen layer and fine quartz coating
- Dimensions = 500 x 500 mm
- Material thickness = 3.1 mm
- Manufacturer: Phoenix Restrix MB
|
|
|
Mechanical odour trap with pendulum flap for TECEdrainpoint S drains as odour and vermin barrier. Suitable to retrofit to all TECEdrainpoint S floor drains.
|
|
|
Odour trap for TECEdrainpoint S drains made of plastic (PP) with inner sealing lip membrane as protection against evaporation, barrier against odours and vermin, water seal and sealing lip membrane provide two-stage trap effect. Suitable to retrofit to all TECEdrainpoint S floor drains.
|
|
|
Hair trap made of plastic, for insertion in the TECEdrainpoint S drain.
|
|
|
Assembly feet for TECEdrainpoint S drains with universal flange to make it easy to adjust height and fix in position during the bare-wall installation stage.
Adjustment range lower edge of feet to the upper edge of universal flange: 64-165 mm
Consisting of 4 assembly feet incl. sound-proofing element and mounting material.
|
|
|
Adapter to connect TECEdrainline and TECEdrainpoint S drains to PVC waste water pipes.
|