|
|
Insulation made of EPS DES sg BS50-SD20-CP2, WLG 040, Rλ = 0.75 m²K/W, coated with a tear-resistant strip woven film, moveable load max. 5 kN/m², impact sound improvement 29 dB (to DIN 4109-34: 2016-07 with 60 mm total screed thickness or 45 mm pipe overlap), HBCD-free.
|
|
|
Insulation made of EPS DES sm BS50-SD15-CP3, WLG 045, Rλ = 0.67 m²K/W, class E/B2, coated with a tear-resistant strip woven film, moveable load max. 4 kN/m², impact sound improvement 31 dB (to DIN 4109-34: 216-07 with 60 mm total screed thickness or 45 mm pipe overlap), HBCD-free.
|
|
|
Adhesive tape to create a waterproof screed form by sticking on the stapled insulation joints.
|
|
|
Tape unwinder for efficient use of adhesive tape.
|
|
|
Tacking tool specially designed for extra-wide tacking pins T8 extra (8 mm). The precision-made tools are distinguished by their excellent reliability. Incl. stand, weight and inspection opening.
Not suitable for conventional 6 mm tacking pins.
|
|
|
Extra-wide tacking pins with 8 mm wide clip for better fixing and guiding of heating pipes, particularly in floor areas. Tacking pin with special anchor, very good foil penetration, low damage to strip woven film and improved hold with 45° angle of pull (curves). Optimised for EPS insulation, not suitable for PUR insulation.
Cannot be used with standard tacking tools!
|
|
|
Standard tacking tool for conventional 6 mm tacking pins of length 40 mm or 55 mm. These precision-made tools are distinguished by their excellent reliability. Incl. stand, weight and inspection opening.
|
|
|
Standard tacking pins, heat-applied, can be used with many conventional tacking tools.
|
|
|
10 mm thick EPS DEO dh BS200-CS(10)150 folding tacking sheet for universal laying on customer's insulation such as suitable mineral wool, EPS or PUR insulation or in renovations on the existing screed, HBCD-free.
- Made of expanding polystyrene EPS, nominal value of the der thermal conductivity 0.034 W/mK (EN 13163; EN 12667), Rλ = 0,29 m²K/W
- Compression strength at 10 % compression 150 kPA CS(10/Y) 150 (EN 826; EN 13163), EPS Euroclass E (EN 13501-1)
- Coated with a highly tear-resistant, finely woven, fibre-reinforced multi-layer composite woven film made of polyethylene (EN 1264-4), highly adhesive, for very high holding forces for the TECEfloor 10plus tacking pins
- One-sided, self-adhesive 30 mm film overlap, grid printing 10 cm
EPS strength: 10 mm Dimensions: 1.60 x 1.20 m (1.92 m²), delivered folded: 0.80 x 1.20 m
|
|
|
Tacking tool 10plus, suitable only for use with type 10plus tacking pins. These precision-made tools are distinguished by their excellent reliability.
|