|
|
Octa II cistern including “easy fit” flush plate installation for floor-standing toilet, depth 8 cm; for installation in or in front of a solid wall.
Octa II cistern 8 cm, for front actuation:
- Safety tank made of impact-resistant plastic, tested to EN 14055
- Cistern fully pre-assembled and sealed
- Cistern connection with outer thread R 1/2" at the top, compatible with quick adapters
- 7-litre tank volume; 6-litre pre-set standard flush volume, 4.5-litre flush volume can be set at any time; 3-litre partial flush volume for dual-flush system; optional setting of a 4/2 litre flush volume possible.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be used as a single or dual-flush cistern
- “easy fit” flush plate installation
- Installation tunnel for service opening, can be shortened without tools
- Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109
- Reinforcement fabrics for mounting
|
|
|
Octa cistern for floor-standing toilet, depth 8 cm, for installation in a wall or in front of a solid wall.
Consisting of:
- Safety tank made of impact-resistant plastic
- Cistern fully pre-assembled and sealed
- Cistern connection with 1/2" inner thread
- 9.5 litre tank volume; 6 litre preset standard flush volume; 4.5/6/9-litre flush volume can be set as an option at any time; 3 litre partial flush volume with dual-flush system. Residual volume usable for immediate flush cleaning.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be set as a single or dual-flush cistern depending on the flush plate used
- Tested to EN 14055
- Low-noise hydraulic filling valve
- Reinforcement fabrics for mounting
|
|
|
Octa II cistern including “easy fit” flush plate installation for floor-standing toilet, depth 8 cm; for installation in or in front of a solid wall.
Octa II cistern 8 cm, for front actuation:
- Safety tank made of impact-resistant plastic, tested to EN 14055
- Cistern fully pre-assembled and sealed
- Cistern connection with outer thread R 1/2" at the top, compatible with quick adapters
- 7-litre tank volume; 6-litre pre-set standard flush volume, 4.5-litre flush volume can be set at any time; 3-litre partial flush volume for dual-flush system; optional setting of a 4/2 litre flush volume possible.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be used as a single or dual-flush cistern
- “easy fit” flush plate installation
- Installation tunnel for service opening, can be shortened without tools
- Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109
- Reinforcement fabrics for mounting
Module frame:
- Steel frame, galvanised
- Two M 12 retaining bolts and M 12 nuts, 180 or 230 mm installation spacing
- Toilet drain bend DN 90 made of PE-HD
- DN 90 toilet connection set including protective plug
|
|
|
Toilet module for wall toilet, depth 8 cm, for installation in a bricked-in wall or in front of a solid wall construction.
Consisting of:
Octa cistern, 8 cm, for front actuation:
- Safety tank made of impact-resistant plastic
- Cistern completely pre-assembled and sealed
- Cistern connection with 1/2" inner thread
- 9.5-litre tank volume; 6-litre preset standard flush volume; 4.5/6/9-litre flush volume can be set at any time; 3-litre partial flush volume with dual-flush system. Residual volume usable for immediate flush cleaning.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be set as a single or dual-flush cistern depending on the flush plate used
- Tested to EN 14055
- Low-noise hydraulic filling valve
- Reinforcement fabrics for mounting
Module consisting of:
- Drain bend DN 90/90 PE-HD
- Toilet connection set DN 90 including protection plugs
- 180 or 230 mm ceramic mounting distance
|
|
|
Octa II cistern including “easy fit” flush plate installation for floor-standing toilet, depth 8 cm; for installation in or in front of a solid wall.
Octa II cistern 8 cm, for front actuation:
- Safety tank made of impact-resistant plastic, tested to EN 14055
- Cistern fully pre-assembled and sealed
- Cistern connection with outer thread R 1/2" at the top, compatible with quick adapters
- 7-litre tank volume; 6-litre pre-set standard flush volume, 4.5-litre flush volume can be set at any time; 3-litre partial flush volume for dual-flush system; optional setting of a 4/2 litre flush volume possible.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be used as a single or dual-flush cistern
- “easy fit” flush plate installation
- Installation tunnel for service opening, can be shortened without tools
- Low-noise hydraulic filling valve, fitting group 1 according to DIN 4109
- Reinforcement fabrics for mounting
- With connection for odour extraction DN 50
Module frame:
- Steel frame, galvanised
- Two M 12 retaining bolts and M 12 nuts, 180 or 230 mm installation spacing
- Toilet drain bend DN 90 made of PE-HD
- DN 90 toilet connection set including protective plug
|
|
|
Toilet module for wall toilet, depth 8 cm, for installation in a bricked-in wall or in front of a solid wall construction.
Consisting of:
Octa cistern, 8 cm, for front actuation:
- Safety tank made of impact-resistant plastic
- Cistern completely pre-assembled and sealed
- Cistern connection with 1/2" inner thread
- 9.5-litre tank volume; 6-litre preset standard flush volume; 4.5/6/9-litre flush volume can be set at any time; 3-litre partial flush volume with dual-flush system. Residual volume usable for immediate flush cleaning.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be set as a single or dual-flush cistern depending on the flush plate used.
- Tested to EN 14055
- Low-noise hydraulic filling valve
- Reinforcement fabrics for mounting
Module consisting of:
- Drain bend DN 90/90 PE-HD
- Toilet connection set DN 90 including protection plugs
- Connection DN 50 for odour extraction
- 180 or 230 mm ceramic mounting distance
|
|
|
Toilet module for wall toilet, depth 8 cm, for installation in a bricked-in wall or in front of a solid wall construction.
Consisting of:
Octa cistern, 8 cm, for front actuation:
- Safety tank made of impact-resistant plastic
- Cistern completely pre-assembled and sealed
- Cistern connection with 1/2" inner thread
- 9.5-litre tank volume; 6-litre preset standard flush volume; 4.5/6/9-litre flush volume can be set at any time; 3-litre partial flush volume with dual-flush system. Residual volume usable for immediate flush cleaning.
- Insulated against condensation water
- For TECE flush plates and toilet flush handle
- Can be set as a single or dual-flush cistern depending on the flush plate used.
- Tested to EN 14055
- Low-noise hydraulic filling valve
Module consisting of:
- Drain bend DN 90/90 PE-HD
- Toilet connection set DN 90 including protection plugs
- Sound insulation kit
- Lower build space sound-insulated
- 180 or 230 mm ceramic mounting distance
|