|
|
Mounting feet for TECEdrainprofile drains for easy height adjustment and position fixing during shell installation. Adjustment range on “standard” drain 95-194 mm, on “flat” drain 65-164 mm and for “vertical” drain 58-157 mm (lower edge of feet to the upper edge of drain or screed).
Consisting of:
- 3 mounting feet incl. sound insulation cap and attachment material
|
|
|
Assembly bracket for all TECEdrainprofile drains for wall- or floor assembly. For easy height adjustment and position fixing during shell installation.
- The mounting bracket can be disassembled and reused when used for wall mounting.
- Adjustable wall distances of 0 to 97/145 mm (top edge of wall to drain front/centre of drain)
- Height adjustment for floor-mounting 95-185 mm (lower edge of feet to the upper edge of drain or screed)
|
|
|
Hair trap made of stainless steel for inserting into the TECEdrainprofile shower profile. With "push function" for easy removal by hand. One set (consisting of two hair traps) is required for one shower profile.
|
|
|
Fire protection set for direct vertical installation on the TECEdrainline/TECEdrainprofile DN 50 drain, for highly fire resistant partitioning of ceiling bushings in solid ceilings up to 120 min., classification in accordance with EN 13501 for fire protection class EI 120, European technical approval (ETA-11/0437).
Set consists of:
- Fire protection sleeve, 2 cross-recessed screws, identification plate, 150 mm DN 50 PP-HT pipe according to EN 1451
- Required core drill hole: ø 130 mm (ø min = 129 mm, ø max = 133 mm)
- Application area: Solid ceilings from 150-325 mm ceiling thickness
- No grouting or filling of the gap is necessary
- Compatible with all TECEdrainline channels and covers
|
|
|
Mounting board for TECEdrainprofile Nordic DN 75 drains for installation in wooden beam ceilings.
- Mounting board made of plywood
- Easily adaptable for installation of the shower profile flush with the wall or for installation at any distance from the wall
- Distance from upper edge of mounting board to upper edge of drain (lower edge of seal): 13 mm
- Drain holder made of galvanised steel
- Screws for attachment
|
|
|
Assembly feet for TECEdrainprofile Nordic DN 75 drains, for installation in the screed, for height adjustment and position fixing during shell installation. Adjustment range 95-200 mm (lower edge of feet to upper edge of drain or upper edge of screed)
|
|
|
Sound insulation mat for assembly under floating screed in the area of floor-level showers or throughout the bathroom. To reduce plumbing noise and provide impact noise insulation for renovations and new buildings. Made from recycled high-tensile rubber granules bound with PUR elastomer. Meets enhanced sound insulation requirements for installation noise level according to DIN 4109-5, issued 2020-08 and the highest sound insulation level SSt III according to VDI 4100, issued 2012-10 (sound test verification available on request).
- Form of delivery: 1.25 m x 1.25 m x 6 mm
- Fire class: B2 (DIN 4102)
- Thermal resistance: 0.05 (m²K)/W
- Compression at 15 t/m²: 0.6 mm
- Impact noise reduction: ΔLw= 20 dB(A) (for 50 mm screed)
|
|
|
Sound insulation mat for assembly under floating screed in the area of floor-level showers or throughout the bathroom. To reduce plumbing noise and provide impact noise insulation for renovations and new buildings. Made from recycled high-tensile rubber granules bound with PUR elastomer. Meets enhanced sound insulation requirements for installation noise level according to DIN 4109-5, issued 2020-08 and the highest sound insulation level SSt III according to VDI 4100, issued 2012-10 (sound test verification available on request).
- Form of delivery: 8.0 m x 1.25 m x 6 mm (roll, approx. 50 kg)
- Fire class: B2 (DIN 4102)
- Thermal resistance: 0.05 (m²K)/W
- Compression at 15 t/m²: 0.6 mm
- Impact noise reduction: ΔLw= 20 dB(A) (for 50 mm screed)
|