|
|
Insulation made of EPS DES sg BS50-SD20-CP2, WLG 040, Rλ = 0.75 m²K/W, coated with a tear-resistant strip woven film, moveable load max. 5 kN/m², impact sound improvement 29 dB (to DIN 4109-34: 2016-07 with 60 mm total screed thickness or 45 mm pipe overlap), HBCD-free.
|
|
|
Insulation made of EPS DES sm BS50-SD15-CP3, WLG 045, Rλ = 0.67 m²K/W, class E/B2, coated with a tear-resistant strip woven film, moveable load max. 4 kN/m², impact sound improvement 31 dB (to DIN 4109-34: 216-07 with 60 mm total screed thickness or 45 mm pipe overlap), HBCD-free.
|
|
|
2 mm thick PP hollow chamber sheet for universal laying on insulation on-site such as suitable mineral wool, EPS or PUR insulation. Suitable for the secure fixture of TECEfloor underfloor heating pipes using TECEfloor tacking pins T8, T6 or 10plus. Rolls L x W: 30 m x 1.0 m (30 m²)
|
|
|
Adhesive tape to create a waterproof screed form by sticking on the stapled insulation joints.
|
|
|
Tape unwinder for efficient use of adhesive tape.
|
|
|
Standard tacking tool for conventional 6 mm tacking pins of length 40 mm or 55 mm. These precision-made tools are distinguished by their excellent reliability. Incl. stand, weight and inspection opening.
|
|
|
Standard tacking pins, heat-applied, can be used with many conventional tacking tools.
|
|
|
Thermal insulation board made of expanded polystyrene rigid foam EPS DEO dh BS200-CS(10)150 according to EN 13163, laminated with a tear-resistant ribbon fabric foil, with 5 cm grid imprint, as screed moisture protection according to DIN 18560 and for secure fixing of the heating pipes using TECEfloor tacker pins 10plus. Panel thickness: 10 mm, thermal conductivity: 0.034 W/mK (WLS 040), thermal resistance: 0.29 m²K/W, compression strength at 10% compression 150 kPa, fire behaviour: E (B2), panel dimension: 2.0 x 1.0 m (2 m²)
|
|
|
10 mm thick EPS DEO dh BS200-CS(10)150 folding tacking sheet for universal laying on customer's insulation such as suitable mineral wool, EPS or PUR insulation or in renovations on the existing screed, HBCD-free.
- Made of expanding polystyrene EPS, nominal value of the der thermal conductivity 0.034 W/mK (EN 13163; EN 12667), Rλ = 0,29 m²K/W
- Compression strength at 10 % compression 150 kPA CS(10/Y) 150 (EN 826; EN 13163), EPS Euroclass E (EN 13501-1)
- Coated with a highly tear-resistant, finely woven, fibre-reinforced multi-layer composite woven film made of polyethylene (EN 1264-4), highly adhesive, for very high holding forces for the TECEfloor 10plus tacking pins
- One-sided, self-adhesive 30 mm film overlap, grid printing 10 cm
EPS strength: 10 mm Dimensions: 1.60 x 1.20 m (1.92 m²), delivered folded: 0.80 x 1.20 m
|
|
|
Tacking tool 10plus, suitable only for use with type 10plus tacking pins. These precision-made tools are distinguished by their excellent reliability.
|