|
|
Mixing group with thermostatic valve for connecting with TECEfloor manifolds made of brass and stainless steel. The valve scale from 1-6 simplifies setting the desired temperature for the underfloor heating system within the supply temperature range of 20-43 °C. The device is designed for modern heating systems with a low temperature heat source. The temperature of the water coming from the boiler room should be at least 5 °C higher than the temperature set on the three-way thermostatic valve.
The set contains:
- TECE WILO PARA mixing pump
- Integrated thermostat valve Kvs = 2.5
- 2 x ball shut-off valves Rp 3/4"
- Thermal protection that switches off the pump when the temperature after mixing exceeds 55-60 °C.
- 2 x 0-100 °C pointer thermometers
- 2 x manifold wall brackets
Connection on the primary side Rp 3/4" Manifold mount R1", flat seal Installation width: 195 mm
|
|
|
Mixing group with three-way valve and linear drive (0-10 V), designed for the use of weather-based control systems. Can be combined with TECEfloor manifolds made of brass and stainless steel. The device is designed for modern heating systems with a low temperature heat source. The temperature of the water coming from the boiler room should be at least 5 °C higher than declared for supplying the underfloor heating.
The set contains:
- TECE WILO PARA mixing pump
- Three-way valve Kvs = 4.3
- 2 x ball shut-off valves Rp 3/4"
- Thermal protection that switches off the pump when the temperature after mixing exceeds 55-60 °C.
- 2 x 0-100 °C dial thermometers
- 2 x manifold wall brackets
Connection on the primary side Rp 3/4" Manifold mount R1", flat seal Width: 225 mm
|
|
|
Included in the scope of delivery:
- Manifold bar with built-in powered magnetic flow meters for regulating flow in the range of 0.5-3.5 l/min
- Manifold bar with built-in thermostat valve inserts for attaching thermoelectric thermostat heads
- Set with bracket and clamp units for the bars
- two fans
- Draining and filling valves with hose connector
- two connection valves Rp 3/4" for manifold
For connecting heating pipes, use the alternative dimensions 16, 17, 20 mm.
|
|
|
The device is intended for modern underfloor heating systems with low temperature heat source. The temperature of the water from the boiler should be 5 °C lower than shown on the thermostatic 3-way valve.
The scope of delivery contains:
- Brass manifold 1" with magnetic flow meters to regulate the flow (supply to the heating elements) in the range of 0.5-3.5 l/min as well with thermostat valve inserts in the bar for attaching thermoelectric thermostat heads of 3-10 sections (lower barn)
- Mixer bypass (do not change the factory settings)
- two draining and filling valves with hose connector 3/4"
- two manual bleed valves
- WILO Yonos PARA mixing valve
- integrated thermostat valve with kv = 2.3
- two shut-off ball valves Rp 3/4"
- thermal guard that shuts off the pump in the event that the water exceeds a temperature of 55-60°C after mixing
- two display thermometers 0-100 °C
- Service key
|
|
|
Stainless steel heating circuit manifold, heating circuit manifold bar with large chamber volume, surface polished, sound-absorbent plastic holder with fast assembly function, with union nut 1" flat sealing. Integrated return valves with double O-ring seal on valve tappet, valve disk with O-ring sealing for permanently reliable closing of the heating circuits, flow metre with shut-off, 0.2-5.0 l/min. with locking mechanism to EN 1264-4. Sight glasses can be exchanged under system pressure, batch indication and tracking for the unique identification of the manifold, even after many years of operation (supply of accessories and spare parts). SLQ quality-monitored and tested for compatibility. Every manifold is 100 % tested for tightness and function. Made in Germany
|
|
|
Ball valve with 1" connection, nickel plated, incl. flat seal, installation dimension 70 mm.
|
|
|
Angled ball valve set consisting of return or flow ball valve with angled connection. Manifold connection R 1", flat sealing. Primary connection Rp 3/4" or Rp 1", incl. flat seal. Installation dimension 125 mm.
|
|
|
Ball valve Rp 1" x R 1", including flat seal. Brass body, nickel-plated. Nominal pressure PN 25. Plastic turning handle and integrated thermometer. Display 0-120 °C. Accuracy class 2 according to EN 13190. Including clips in red and blue for identification of flow and return.
|
|
|
Industrial plastic manifold 1 1/2", basic module for the modular installation of industrial manifolds up to 20 heating circuits, incl. boiler filling/emptying tap and wall mount. Testing pressure 6 bar (< 30 °C, 24 h), operating pressure 3 bar, -20 °C to 60 °C.
|
|
|
Industry heating circuit manifold module, 2-20 heating circuits can be added modularly, O-ring sealing, pre-flow segment with flow rate metre 4-20 l/ min., return segment with integrated valve. For connecting the TECEfloor PE-RT 5S pipes 25 x 2.5 mm using the TECEfloor connection adapter.
|